Tatami is so beautiful, but is your home really installed correctly? Do you really understand the design of tatami
tatami, with its beauty and strength, convenience, practicality and powerful storage function, is loved by more and more people
it can be satisfied with different spaces, such as living room, balcony, bay window, bedroom and so on
as an economic and practical existence, tatami began to enter more home decoration
then, do you really understand the design of tatami
Design of platform height
the design height of tatami is determined by the floor height of the house and the height of the required storage space
if the floor height is 3 meters or higher, the tatami height is 40 cm or higher, which can reflect its practicality
on the contrary, the design height should be reduced accordingly
size selection
generally, it will be selected according to the actual area of the house type, and different designs will be carried out according to different spaces
tatami has standard regular rectangle and non-standard rectangle. The length ratio of regular rectangle is, length: width =2:1, and the size specification of tatami is 1800mm × 900mm;
the standard thickness is 35mm, 45mm and 55mm, but generally 55mm thickness specification is adopted
material selection
common tatami main materials include large core board, high (medium) density board, three-layer plywood, finger joint board and solid wood, and different material prices are also different
the most expensive is solid wood, followed by connecting board and large core board, while plywood and high (medium) density board are lower
waterproof and breathable treatment
first of all, start with the underframe. When decorating the underframe of tatami, you must remember to carry out insect proof treatment and moisture-proof treatment. It is best to reserve a vent hole to prevent mildew and moisture inside
the surface plate of tatami platform can be solid wood or rechecked floor. The floor should also be moisture-proof and insect proof, and be careful not to damage the original waterproof layer